HBase Replication

At the top of the diagram, the San Jose and Tokyo clusters, shown in red, replicate changes to each other, and each also replicates changes to a User Data and a Payment Data cluster.

Each cluster in the second row, shown in blue, replicates its changes to the All Data Backup 1 cluster, shown in grey. The All Data Backup 1 cluster replicates changes to the All Data Backup 2 cluster (also shown in grey), as well as the Data Analysis cluster (shown in green). All Data Backup 2 also propagates any of its own changes back to All Data Backup 1.

The Data Analysis cluster runs MapReduce jobs on its data, and then pushes the processed data back to the San Jose and Tokyo clusters.

• The timestamps of the replicated HLog entries are kept intact. In case of a collision (two entries identical as to row key, column family, column qualifier, and timestamp) only the entry arriving later write will be read.
• Increment Column Values (ICVs) are treated as simple puts when they are replicated. In the case where each side of replication is active (new data originates from both sources, which then replicate each other), this may be undesirable, creating identical counters that overwrite one another. (See https://issues.apache.org/jira/browse/HBase-2804.)
• Make sure the source and destination clusters are time-synchronized with each other. Cloudera recommends you use Network Time Protocol (NTP).

• Some changes are not replicated and must be propagated through other means, such as Snapshots or CopyTable.

  • Data that existed in the active cluster before replication was enabled.

  • Operations that bypass the WAL, such as when using BulkLoad or API calls such as writeToWal(false).

  • Table schema modifications.

Before configuring replication, make sure your environment meets the following requirements:

• You must manage ZooKeeper yourself. It must not be managed by HBase, and must be available throughout the deployment.
• Each host in both clusters must be able to reach every other host, including those in the ZooKeeper cluster.
• Both clusters must be running the same major version of CDH; for example CDH 5.
• Every table that contains families that are scoped for replication must exist on each cluster and have exactly the same name. If your tables do not yet exist on the destination cluster, see Creating the Empty Table On the Destination Cluster.
• HBase version 0.92 or greater is required for complex replication topologies, such as active-active.

The following steps describe how to set up secure replication between clusters. The steps are the same whether your clusters are all in the same realm or not, with the exception of the last step.

The last step involves setting up custom secure replication configurations per peer. This can be convenient when you need to replicate to a cluster that uses different cross-realm authentication rules than the source cluster. For example, a cluster in Realm A may be allowed to replicate to Realm B and Realm C, but Realm B may not be allowed to replicate to Realm C. If you do not need this feature, skip the last step.

To use this feature, service-level principals and keytabs (specific to HBase) must be specified when you create the cluster peers using HBase Shell.

1. Set up Kerberos on your cluster, as described in Enabling Kerberos Authentication Using the Wizard.
2. If necessary, configure Kerberos cross-realm authentication.
   • At the command line, use the list_principals command to list the kdc, admin_server, and default_domain for each realm.
   • Add this information to each cluster using Cloudera Manager. For each cluster, go to HDFS > Configuration > Trusted Kerberos Realms. Add the target and source. This requires a restart of HDFS.
3. Configure ZooKeeper.
4. Configure the following HDFS parameters on both clusters, in Cloudera Manager or in the listed files if you do not use Cloudera Manager:

   <!-- In hdfs-site.xml or advanced configuration snippet -->
   <property>
     <name>dfs.encrypt.data.transfer</name>
     <value>true</value>
   </property>
   <property>
     <name>dfs.data.transfer.protection</name>
     <value>privacy</value>
   </property>
   
   <!-- In core-site.xml or advanced configuration snippet -->
   <property>
     <name>hadoop.security.authorization</name>
     <value>true</value>
   </property>
   <property>
     <name>hadoop.rpc.protection</name>
     <value>privacy</value>
   </property>
   <property>
     <name>hadoop.security.crypto.cipher.suite</name>
     <value>AES/CTR/NoPadding</value>
   </property>
   <property>
     <name>hadoop.ssl.enabled</name>
     <value>true</value>
   </property>

5. Configure the following HBase parameters on both clusters, using Cloudera Manager or in hbase-site.xml if you do not use Cloudera Managert.

   <!-- In hbase-site.xml -->
   <property>
     <name>hbase.rpc.protection</name>
     <value>privacy</value>
   </property>
   <property>
     <name>hbase.thrift.security.qop</name>
     <value>auth-conf</value>
   </property>
   <property>
     <name>hbase.thrift.ssl.enabled</name>
     <value>true</value>
   </property>
   <property>
     <name>hbase.rest.ssl.enabled</name>
     <value>true</value>
   </property>
   <property>
     <name>hbase.ssl.enabled</name>
     <value>true</value>
   </property>
   <property>
     <name>hbase.security.authentication</name>
     <value>kerberos</value>
   </property>
   <property>
     <name>hbase.security.authorization</name>
     <value>true</value>
   </property>
   <property>
     <name>hbase.secure.rpc.engine</name>
     <value>true</value>
   </property>

6. Add the cluster peers using the simplified add_peer syntax, as described in Add Peer.

   add_peer 'ID', 'CLUSTER_KEY'

7. If you need to add any peers which require custom security configuration, modify the add_peer syntax, using the following examples as a model.

   add_peer 'vegas', CLUSTER_KEY => 'zk1.vegas.example.com:2181:/hbase',
            CONFIG => {'hbase.master.kerberos.principal'           => 'hbase/_HOST@TO_VEGAS',
                       'hbase.regionserver.kerberos.principal'     => 'hbase/_HOST@TO_VEGAS',
                       'hbase.regionserver.keytab.file'            => '/keytabs/vegas_hbase.keytab',
                       'hbase.master.keytab.file'                  => '/keytabs/vegas_hbase.keytab'},
             TABLE_CFS => {"tbl" => [cf1']}
   
   add_peer 'atlanta', CLUSTER_KEY => 'zk1.vegas.example.com:2181:/hbase',
            CONFIG => {'hbase.master.kerberos.principal'           => 'hbase/_HOST@TO_ATLANTA',
                       'hbase.regionserver.kerberos.principal'     => 'hbase/_HOST@TO_ATLANTA',
                       'hbase.regionserver.keytab.file'            => '/keytabs/atlanta_hbase.keytab',
                       'hbase.master.keytab.file'                  => '/keytabs/atlanta_hbase.keytab'},
             TABLE_CFS => {"tbl" => [cf2']}

To re-enable the peer, use the command enable_peer(<"peerID">). Replication resumes.

Examples:

• To disable peer 1:

disable_peer("1")

• To re-enable peer 1:

enable_peer("1")

If replication is causing serious problems, you can stop it while the clusters are running.

Open the shell on the source cluster and use the disable_peer command for each peer, then the disable_table_replication command. For example:

hbase> disable_peer("1")
hbase> disable_table_replication

Already queued edits will be replicated after you use the disable_table_replication command, but new entries will not. See Understanding How WAL Rolling Affects Replication.

To start replication again, use the enable_peer command.

If the table to be replicated does not yet exist on the destination cluster, you must create it. The easiest way to do this is to extract the schema using HBase Shell.

1. On the source cluster, describe the table using HBase Shell. The output below has been reformatted for readability.

   hbase> describe acme_users
   
   Table acme_users is ENABLED
   acme_users
   COLUMN FAMILIES DESCRIPTION
   {NAME => 'user', DATA_BLOCK_ENCODING => 'NONE', BLOOMFILTER => 'NONE',
   REPLICATION_SCOPE => '0', VERSIONS => '3', COMPRESSION => 'NONE',
   MIN_VERSIONS => '0', TTL => 'FOREVER', KEEP_DELETED_CELLS => 'FALSE',
   BLOCKSIZE => '65536', IN_MEMORY => 'false', BLOCKCACHE => 'false'}

2. Copy the output and make the following changes:
   • For the TTL, change FOREVER to org.apache.hadoop.hbase.HConstants::FOREVER.
   • Add the word CREATE before the table name.
   • Remove the line COLUMN FAMILIES DESCRIPTION and everything above the table name.
   The result is a command like the following:

   "CREATE 'cme_users' ,
   
   {NAME => 'user', DATA_BLOCK_ENCODING => 'NONE', BLOOMFILTER => 'NONE',
   REPLICATION_SCOPE => '0', VERSIONS => '3', COMPRESSION => 'NONE',
   MIN_VERSIONS => '0', TTL => org.apache.hadoop.hbase.HConstants::FOREVER, KEEP_DELETED_CELLS => 'FALSE',
   BLOCKSIZE => '65536', IN_MEMORY => 'false', BLOCKCACHE => 'false'}

3. On the destination cluster, paste the command from the previous step into HBase Shell to create the table.

You may need to start replication from some point in the past. For example, suppose you have a primary HBase cluster in one location and are setting up a disaster-recovery (DR) cluster in another. To initialize the DR cluster, you need to copy over the existing data from the primary to the DR cluster, so that when you need to switch to the DR cluster you have a full copy of the data generated by the primary cluster. Once that is done, replication of new data can proceed as normal.

One way to do this is to take advantage of the write accumulation that happens when a replication peer is disabled.

1. Start replication.
2. Add the destination cluster as a peer and immediately disable it using disable_peer.
3. On the source cluster, take a snapshot of the table and export it. The snapshot command flushes the table from memory for you.
4. On the destination cluster, import and restore the snapshot.
5. Run enable_peer to re-enable the destination cluster.

When you add a new peer cluster, it only receives new writes from the source cluster since the last time the WAL was rolled.

The following diagram shows the consequences of adding and removing peer clusters with unpredictable WAL rolling occurring. Follow the time line and notice which peer clusters receive which writes. Writes that occurred before the WAL is rolled are not retroactively replicated to new peers that were not participating in the cluster before the WAL was rolled.

If you want to make HBase Replication secure, follow the instructions under HBase Authentication.

One of the main reasons for replications is to be able to restore data, whether during disaster recovery or for other reasons. During restoration, the source and sink roles are reversed. The source is the replica cluster, and the sink is the cluster that needs restoration. This can be confusing, especially if you are in the middle of a disaster recovery scenario. The following image illustrates the role reversal between normal production and disaster recovery.

To verify that HBase replication is working, follow these steps to confirm data has been replicated from a source cluster to a remote destination cluster.

1. Install and configure YARN on the source cluster.

   If YARN cannot be used in the source cluster, configure YARN on the destination cluster to verify replication. If neither the source nor the destination clusters can have YARN installed, you can configure the tool to use local mode; however, performance and consistency could be negatively impacted.

2. Make sure that you have the required permissions:
   • You have sudo permissions to run commands as the hbase user, or a user with admin permissions on both clusters.
   • You are an hbase user configured for submitting jobs with YARN.
3. Run the VerifyReplication command:

   src-node$ sudo -u hbase hbase org.apache.hadoop.hbase.mapreduce.replication.VerifyReplication peer1 table1
   ...
           org.apache.hadoop.hbase.mapreduce.replication.VerifyReplication$Verifier$Counters
                   BADROWS=2
                   CONTENT_DIFFERENT_ROWS=1
                   GOODROWS=1
                   ONLY_IN_PEER_TABLE_ROWS=1
           File Input Format Counters
                   Bytes Read=0
           File Output Format Counters
                   Bytes Written=0

   The following table describes the VerifyReplication counters:

   VerifyReplication Counters

   Counter	Description
   GOODROWS	Number of rows. On both clusters, and all values are the same.
   CONTENT_DIFFERENT_ROWS	The key is the same on both source and destination clusters for a row, but the value differs.
   ONLY_IN_SOURCE_TABLE_ROWS	Rows that are only present in the source cluster but not in the destination cluster.
   ONLY_IN_PEER_TABLE_ROWS	Rows that are only present in the destination cluster but not in the source cluster.
   BADROWS	Total number of rows that differ from the source and destination clusters; the sum of CONTENT_DIFFERENT_ROWS + ONLY_IN_SOURCE_TABLE_ROWS + ONLY_IN_PEER_TABLE_ROWS

By default, VerifyReplication compares the entire content of table1 on the source cluster against table1 on the destination cluster that is configured to use the replication peer peer1.

src-node$ sudo -u hbase hbase org.apache.hadoop.hbase.mapreduce.replication.VerifyReplication --starttime=1472499077000 --endtime=1472585477000 --families=c1  peer1 table1

• Two variables govern replication: hbase.replication as described above under Deploying HBase Replication, and a replication znode. Stopping replication (using disable_table_replication as above) sets the znode to false. Two problems can result:
  • If you add a new RegionServer to the active cluster while replication is stopped, its current log will not be added to the replication queue, because the replication znode is still set to false. If you restart replication at this point (using enable_peer), entries in the log will not be replicated.
  • Similarly, if a log rolls on an existing RegionServer on the active cluster while replication is stopped, the new log will not be replicated, because the replication znode was set to false when the new log was created.
• In the case of a long-running, write-intensive workload, the destination cluster may become unresponsive if its meta-handlers are blocked while performing the replication. CDH 5 provides three properties to deal with this problem:
  • hbase.regionserver.replication.handler.count - the number of replication handlers in the destination cluster (default is 3). Replication is now handled by separate handlers in the destination cluster to avoid the above-mentioned sluggishness. Increase it to a high value if the ratio of active to passive RegionServers is high.
  • replication.sink.client.retries.number - the number of times the HBase replication client at the sink cluster should retry writing the WAL entries (default is 1).
  • replication.sink.client.ops.timeout - the timeout for the HBase replication client at the sink cluster (default is 20 seconds).
• For namespaces, tables, column families, or cells with associated ACLs, the ACLs themselves are not replicated. The ACLs need to be re-created manually on the target table. This behavior opens up the possibility for the ACLs could be different in the source and destination cluster.